Article Sidebar

Download
PDF Untitled

Main Article Content

Abstract

A reliable electric power system is needed in distributing electrical energy to customers, in the process of distributing electrical energy, interference in its distribution cannot be avoided, in general, electrical disturbances occur in underground channels, disturbance areas that are prone to and often occur usually at cable connections (Jointing). On cables that are insulated, the emergence of heat is something that must be considered. The current capacity of a cable is influenced by the characteristics of the cable components. Overheating will damage the insulation material and reduce the service life of the cable. The connection process must use the right and correct equipment and materials, to avoid insulation failure in the connection due to excessive heating on the connection which will result in a short circuit which will result in a shutdown of the electrical system. Increasing the skills of workers in the electricity sector is needed to reduce the risk of failure in the electrical system.
Key words: cable jointing, insulation failure, skills

Article Details

References

  1. M Indonesia,2013, Solution for Utility and electrical construction and maintenance, seminar 3M- EMD- AKLI Yogyakarta, 4-5 juni 2013
  2. Daru Tri Nugroho, 2011, Analisis Temperatur Sambungan Kabel Xlpe Tegangan Menengah 20 kv Untuk Berbagai Torsi,2011, jurnal Techno, ISSN 1410 – 8607, Volume 12 No. 2, hal. 78– 82
  3. IDC Technologies Pty Ltd, 2006, Practical HV cable jointing and terminations for Engineers and Technicians, Australia
  4. Nurmiati Pasra, Andi Makkulau, Muhamamd Hasil adnan, 2018, Gangguan Yang Terjadi Pada Sistem Jointing Pada Saluran Kabel Tegangan Menengah 20 Kv, Jurnal Sutet Vol. 8 No.1
  5. Syafriyudin, 2019, materi pelatihan jointing dan terminating HV cable 20 kv. PT. Primaindo Consulting Ygyakarta.
  6. Standart konstruksi jaringan tegangan menengah tenaga lsitrik PLN buku 5, PT PLN, 2010